Home > News

Contact Us

    Add: No. 6015, Taida South Tower, Yingbin North Road, Cangzhou, Hebei, China (Mainland)

    Zip: 061000

    Cell: +8615230701616

            +8613041095969      

    E-mail:sales@highboomingpipe.com
Process Flow Of Seamless Pipe
2021-11-18 11:19:34

Pipe blank——inspection——peeling——inspection——heating——piercing——pickling——grinding——lubricating air drying——welding head——cold drawing——solid solution treatment——pickling——pickling passivation——inspection——cold rolling——degreasing——cutting head——air drying——internal polishing——external polishing——inspection——marking—— Packaging of finished products

manufacturing process

Hot Rolling, Cold Drawing and Hot Expansion

According to different production methods, it can be divided into hot-rolled pipe, cold-rolled pipe, cold-drawn pipe, extruded pipe and so on.

1.1. Hot-rolled seamless tubes are generally produced on automatic tube rolling mills. The solid billet is checked and cleared of surface defects, cut into the required length, centered on the end face of the billet perforation, then sent to the heating furnace for heating, and perforated on the perforator. Under the action of the roll and the top, a cavity is gradually formed inside the billet, which is called capillary. It is then sent to the automatic pipe mill to continue rolling. Finally, the wall thickness of the whole machine is equalized, and the sizing machine is used to calibrate the diameter, which meets the specifications. It is an advanced method to produce hot-rolled seamless steel tube by continuous pipe rolling mill.

1.2. If we want to obtain seamless tubes with smaller size and better quality, we must adopt cold rolling, cold drawing or combination of the two methods. Cold rolling is usually carried out on a two-roll mill. Steel tubes are rolled in an annular pass consisting of a circular groove with variable cross-section and a fixed conical head. Cold drawing is usually carried out on single-chain or double-chain cold-drawing machines of 0.5-100T.

1.3. The extrusion method is to place the heated tube blank in a closed extrusion cylinder, and the perforating rod moves with the extrusion rod to extrude the extruded part from a smaller die hole. This method can produce steel pipes with smaller diameter.